fits

Wood Lathe Bowl Chuck With 8 Jumbo Jaws + 2 Jaw Sets Fits 1-8 + 3/4-16 New

   This is a Wood Lathe Bowl Chuck consisting of a PSI 4" Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets, plus an 8" Jumbo Jaw Set, for use on wood lathes with 3/4-16 or 1-8 threaded spindles. PSI 4 Wood Lathe Bowl Chuck for finishing bowl bottoms. 8 Bowl capacity with jumbo jaws installed and fully extended. Can be used as shown in the pictures on 8 lathes or larger. Set includes: 4" Utility-Grip Chuck (w/ extra sets of jaws) + 8" Jumbo Jaw Set. 4 PSI Utility-Grip Chuck system. 4-Jaw x 4 diameter self-centering chuck threaded 1x8. With adapter bushing for 3/4-16 ...

6-jaw X 4 Self-centering Wood Lathe Bowl Chuck + Screw Fits 1-8 And 1-1/4-8 New

   PSI Barracuda 6-Jaw Self-Centering Wood Lathe Bowl Turning Chuck with Screw Chuck Adapter for use on all wood lathes with 1x8 and 1-1/4x8 threaded spindles. The 6 dovetail jaws on this chuck provide excellent gripping power so this can be used to hold larger bowls on bigger lathes than conventional 4-jaw bowl chucks. 6-Jaw x 4 Barracuda Chuck system by PSI Woodworking. 6-Jaw x 4 diameter self-centering chuck threaded 1-1/4x8. With 1-1/4x8 to 1x8 spindle adapter. Dovetail jaws grip OD's from 1-3/8" to 3" and ID's from 1-15/16" to 3-5/8". With set of 2 chuck tightening rods. With screw...

New Kitchenaid 5-quart Glass Bowl With Lid K5gb Fits Tilt Artisan Models

   5-quart glass bowl fits all KitchenAid tilt head stand mixers except Accolade. Pour spout, wide handle, and measuring lines for easy use. Microwave- and freezer-safe for added functionality. Tight-sealing lid is dishwasher-safe and stores in bowl. Measures 7.5 inches by 9.1 inches by 11.8 inches. Prep, mix, heat, store, and even serve all from one attractive and sturdy vessel with this 5-quart clear glass bowl for KitchenAid stand mixers. Featuring a generous pour spout, wide easy-grasp handle, and embossed measuring lines, the multifunctional bowl goes safely into the microwave and ...

4-jaw X 4 Self-centering Wood Lathe Bowl Chuck + 2 Jaw Sets Fits 3/4-16 And 1-8

   PSI Utility-Grip 4-Jaw Self-Centering Wood Lathe Bowl Turning Chuck with 2 Jaw Sets for use on all wood lathes with 3/4x16 and 1x8 spindles. 4 Utility-Grip Chuck system by PSI Woodworking. 4-Jaw x 4 diameter self-centering chuck threaded 1x8. With 1x8 to 3/4x16 spindle adapter. #1 Step jaws grip OD's from 0" to 1-7/8" and ID's from 21/32" to 2-3/8". #2 Step jaws grip OD's from 0" to 1-7/8" and ID's from 1-1/2" to 3-1/4". Round jaws grip OD's from 1-7/16" to 3" and ID's from 1-15/16" to 3-5/8". With set of 2 chuck tightening rods. With 8 extra jaw mounting screws. With set-up and ...

Wood Lathe Bowl Chuck With 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

   This is a Wood Lathe Bowl Chuck consisting of a PSI 4" Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets, plus an 8" Jumbo Jaw Set, for use on Shopsmith wood lathes with a 5/8 plain spindle and also 1-8 threaded lathe spindles. PSI 4 Wood Lathe Bowl Chuck for finishing bowl bottoms. 8 Bowl capacity with jumbo jaws installed and fully extended. Can be used as shown in the pictures on 8 lathes or larger. Set includes: 4" Utility-Grip Chuck (w/ extra sets of jaws) + 8" Jumbo Jaw Set. 4 PSI Utility-Grip Chuck system. 4-Jaw x 4 diameter self-centering chuck ...

4-jaw X 4 Self-centering Wood Lathe Bowl Chuck + 2 Jaw Sets Fits Shopsmith New

   PSI Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets for use on Shopsmith lathes with a 5/8 plain spindle. 4 Utility-Grip Chuck system by PSI Woodworking. 4-Jaw x 4 diameter self-centering chuck threaded 1x8. With Shopsmith 5/8 plain spindle adapter. #1 Step jaws grip OD's from 0" to 1-7/8" and ID's from 21/32" to 2-3/8". #2 Step jaws grip OD's from 0" to 1-7/8" and ID's from 1-1/2" to 3-1/4". Round jaws grip OD's from 1-7/16" to 3" and ID's from 1-15/16" to 3-5/8". With set of 2 chuck tightening rods. With 8 extra jaw mounting screws. With set-up and ...

14-3/4 Wood Lathe Bowl Chuck + Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

   This is a giant 14-3/4" Wood Bowl Lathe Chuck consisting of a PSI Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets, a Jumbo Jaw Set, and a Flat Jaw Extension Set, for use on Shopsmith wood lathes with a 5/8" plain spindle and also 1-8 threaded lathe spindles. Giant PSI Wood Lathe Bowl Chuck for finishing bowl bottoms. 14-3/4 Bowl capacity with jaws fully extended. Can be used as shown in the pictures on 14 lathes or larger. Extension jaws can be band sawed to any diameter to fit smaller lathes. Set includes: 4" Utility-Grip Chuck (w/ extra sets of jaws), 8" Jumbo ...
Subscribe to RSS - fits