Wood Lathe Bowl Chuck With 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New
Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New



Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New



Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

  Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New


This is a Wood Lathe Bowl Chuck consisting of a PSI 4" Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets, plus an 8" Jumbo Jaw Set, for use on Shopsmith wood lathes with a 5/8 plain spindle and also 1-8 threaded lathe spindles. PSI 4 Wood Lathe Bowl Chuck for finishing bowl bottoms.

8 Bowl capacity with jumbo jaws installed and fully extended. Can be used as shown in the pictures on 8 lathes or larger.

Set includes: 4" Utility-Grip Chuck (w/ extra sets of jaws) + 8" Jumbo Jaw Set. 4 PSI Utility-Grip Chuck system. 4-Jaw x 4 diameter self-centering chuck threaded 1x8.

With Shopsmith spindle adapter for 5/8 plain spindles. #1 Step jaws grip OD's from 0" to 1-7/8" and ID's from 7/16" to 2-3/8". #2 Step jaws grip OD's from 0" to 1-7/8" and ID's from 1-1/2" to 3-1/4". Round jaws grip OD's from 1-7/16" to 3" and ID's from 1-15/16" to 3-5/8". With set of 2 chuck tightening rods.

With 8 extra jaw mounting screws. With 8 pc set of 1/2 rubber coated pins. With 8 pc set of 3/4 rubber coated pins. With set-up and operating instructions & all hardware to mount the 3 jaw sets. Chuck body is chrome plated...

Jaws are black oxide finished. Jumbo Jaws are chrome plated steel. This is a super versatile 4" wood lathe chuck system for finishing the bottom of bowls up to 8" in diameter.
Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and the chuck to the spindle adapter. Failure to properly secure these components can result in injury. The item "Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New" is in sale since Tuesday, August 8, 2017. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Lathes & Accessories".

The seller is "thirddevil" and is located in Jacksonville, Florida. This item can be shipped worldwide.

  • Chuck Size:: 4" Diameter Chuck for bowls up to 8" Diameter
  • Model: 8" Wood Lathe Bowl Finishing Chuck + Extras
  • Modified Item: No
  • Suitable for: Large Wood Turning
  • Custom Bundle: Yes
  • Chuck Type:: 4-Jaw Self-Centering Scroll Chuck for Wood Turning
  • Uses:: Bowl Finishing Clock Making Furniture
  • For Spindle Sizes:: Shopsmith 5/8" Plain and 1-8 Threaded
  • Non-Domestic Product: Yes
  • Type: Lathes Accessories
  • MPN: Does Not Apply
  • Brand: PSI



Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

  Wood Lathe Bowl Chuck with 8 Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New